Dan's Wiki

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Uncle Fester's Basic FreeNAS 9.10 Configuration Guide ======

===== Introduction =====

This guide has been written with complete beginners to FreeNAS in mind (although some general computer knowledge is assumed).

Therefore, depending on your level of knowledge and experience, you probably won’t need to read all the sections.

There is some Fester humour throughout the guide (or what passes for humour in Fester’s very strange world). It is there to try and keep the user of this guide going until they reach the end. This is a very boring document. The humour will not be to everyone’s taste. If you find it offensive just ignore it and move on; Fester means no harm.

==== Aim and Scope of This Guide ====

This guide is for people who want or need to set up FreeNAS as quickly as possible with a minimum of fuss.

The aim is to provide all the information you need in one place to set up a basic FreeNAS server.

* It is not intended to teach or educate.
  * It is no substitute for learning and understanding the FreeNAS OS.
  * It is no substitute for the excellent __[[http://doc.freenas.org/9.10/freenas.html|official guide]]__ that accompanies the FreeNAS OS.
  * It is my attempt to give something back to the FreeNAS community.

It is my hope that others will contribute, augment, update and completely replace parts of this guide so it can be a useful resource to all FreeNAS __beginners__  . To more easily enable this, the guide is highly sectionalised and released under a Creative Commons Attribution license.

==== Disclaimer ====

This guide has been written by a FreeNAS complete beginner for complete beginners.

Proceed at your own risk. I will not be held responsible for anything that happens to your system, you, your hair, the real wood veneered floor, your prostate gland or the world in general. I take no responsibility for anything (just ask anyone who knows me).

===== Table of Contents =====

- Hardware Recommendations

- [[hardware_general|General Hardware Recommendations]]

- [[hardware_specific|Specific Hardware Recommendations]]

- Building Your Server

- [[build_general|General Build Guide]]

- [[build_specific|Why No Specific Build Guide, Fester!]]

- Getting Your Preliminaries Handled

- [[prelim_prerequisites|Prerequisites]]

- [[prelim_modemrouter|Modem/Router Configuration]]

- [[prelim_barrier|Barrier Methods of Protection (Personal Firewalls)]]

- [[prelim_post|Getting Past the POST]]

- [[prelim_bios|Configuring the BIOS]]

- [[hvalid_intro|Hardware Validation]]

- [[hvalid_cpu|Processor Validation]]

- [[hvalid_ram|Memory Validation]]

- [[hvalid_hdd|HDD/SSD Validation]]

- Final FreeNAS Installation

- [[install_create|Creating a Bootable FreeNAS Installer]]

- [[install_installing|Installing FreeNAS 9.10 From a USB Stick]]

- [[install_configuring|Configuring FreeNAS 9.10 (the Essentials)]]

- [[shares_intro|Shares]]

- [[shares_basic|Fester's Very Basic One User/One Dataset Experimental Starter Share]]

- [[jails_intro|Jails]]

- [[jails_global|Global Configuration of Jails]]

- [[jails_plex|Plex Media Server]]

- Additional FreeNAS Configurations to Consider

- [[additional_configbackup|Backup the FreeNAS Configuration File Nightly]]

Fester’s Very Basic One User/One Dataset Experimental Starter

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International